1. Home
Send to a Friend via Email

Adding After-Burn Oil to a Nitro RC

By

2 of 5

Remove the Glow Plug
Remove the glow plug.

Use your glow plug wrench to carefully remove the glow plug from the cylinder.

Photo © M. James
If your nitro RC is equipped with an electric start system begin by taking the glow plug wire off the glow plug with a pair of needlenose pliers. If your nitro RC is not equipped with an electric start system there is no need to do this -- just proceed by removing the glow plug with a glow plug wrench.

©2014 About.com. All rights reserved.